- Home
- Plastic materials
- Volume plastics
- PE 500 R - polyethylene
HMW-PE – High-molecular-weight polyethylene
PE 500 R - polyethylene
A reprocessed PE 500 polyethylene, made mainly from recycled material. Recycled polyethylene is more cost-efficient than the pure material. The plastic is not suitable for use in the food industry. PE 500 R material is available as plastic sheets.
- Physical properties
-
Value Unit Test method Specific gravity 0.96 g/cm3 DIN EN ISO 1183 Average molecular mass 0.5 106 g/mol Water absorption, 24/96 h (23 °C) N/A Weather-resistance moderate Combustibility HB UL 94 DIN EN ISO 527-2 Food safety – - Mechanical properties
-
Value Unit Test method Modulus of elasticity N/A Tensile strength N/A Elongation at break N/A Tensile strength at break N/A Flexural modulus N/A Flexural strength N/A Compressive modulus N/A Compressive strength, 1%/2% N/A Impact strength (Charpy) N/A Notch impact strength (Charpy) does not break kJ/m2 DIN EN ISO 179-1eA Notch impact strength (Izod) – kJ/m2 DIN EN ISO 180/2A Toughness (ball pressure) 50 MPa ISO 2039-1 Toughness (Shore D) 63 Sh D DIN EN ISO 868 Wear-resistance ~400 % Sand-Slurry Coefficient of friction (against steel) ~0.25 μ - Thermal properties
-
Value Unit Test method Glass-transition temperature 80 °C DIN 53765 Melting point 130 °C DIN 53765 Operating temperature (instantaneous) +100 °C Operating temperature (continuous) 80 °C Operating temperature (minimum) -50 °C Thermal expansion coefficient, 23–60 °C N/A Thermal expansion coefficient, 23–100 °C 20 10-5 K-1 DIN EN ISO 11359-1;2 Specific heat capacity N/A Thermal conductivity 0.4 W/(m×K) ISO 22007-4:2008 - Electrical properties
-
Value Unit Test method Surface resistivity N/A Resistivity N/A Dielectric strength N/A CTI value N/A - Optical properties
-
Value Unit Test method Light transmittance N/A Refractive index N/A Optical errors N/A Abrasion-resistance, 100 rotations with 500 g N/A
Additional downloads
Delivery selection | plastic sheets 1,000×2,000 mm, plastic sheets 1,220×3,000 mm |
---|---|
Specific gravity | 0.96 g/cm3 |
Service temperature | -50 … 80 °C |
Price category | € (€3–7/kg) |
Special properties
- good resistance to wear
- high tensile strength at break
- cost-efficiency
- environment-friendliness
Applications
protective plates, bumpers, mechanical engineering
Standard colours
multicoloured, black, green
Premade pieces
Commonly known brands
A4 G FQ, A4 G Multicolor, Murdotec® PE500U, Okulen® 500-REG, Orbilan PE 500 R