PE 1000 MoS² - polyethylene

UHMW-PE – Ultra-high-molecular-weight polyethylene

PE 1000 MoS² - polyethylene

PE 1000 MoS² is an ultra-high-molecular-weight polyethylene (approx. 3.0 million g/mol) plastic that has undergone further processing. Because of the molybdenum disulphide (MoS2) added to it, the polyethylene has enhanced wear‑resistance properties. It is recommended for applications entailing a high degree of wear, including conveyors in mechanical wood processing. We deliver PE 1000 MoS² as plastic sheets.

Add to comparison Remove from comparison Compare products
Physical properties
  Value Unit Test method
Specific gravity 0.948 g/cm3 DIN EN ISO 1183
Average molecular mass ~3 106 g/mol
Water absorption, 24/96 h (23 °C) N/A
Weather-resistance –
Combustibility HB UL 94 DIN EN ISO 527-2
Food safety no
Mechanical properties
  Value Unit Test method
Modulus of elasticity – MPa DIN EN ISO 527-2
Tensile strength >16 MPa DIN EN ISO 527-2
Elongation at break – % DIN EN ISO 527-2
Tensile strength at break >25 % DIN EN ISO 527-2
Flexural modulus – MPa DIN EN ISO 178
Flexural strength – MPa DIN EN ISO 178
Compressive modulus – MPa EN ISO 604
Compressive strength, 1%/2% – MPa EN ISO 604
Impact strength (Charpy) – kJ/m2 DIN EN ISO 179-1eU
Notch impact strength (Charpy) – kJ/m2 DIN EN ISO 179-1eA
Notch impact strength (Izod) – kJ/m2 DIN EN ISO 180/2A
Toughness (ball pressure) 39 MPa ISO 2039-1
Toughness (Shore D) ~66 Sh D DIN EN ISO 868
Wear-resistance ~103 % Sand-Slurry
Coefficient of friction (against steel) ~0.2 μ
Thermal properties
  Value Unit Test method
Glass-transition temperature 80 °C DIN 53765
Melting point – °C DIN 53765
Operating temperature (instantaneous) – °C
Operating temperature (continuous) 80 °C
Operating temperature (minimum) -200 °C
Thermal expansion coefficient, 23–60 °C – 10-5 K-1 DIN EN ISO 11359-1;2
Thermal expansion coefficient, 23–100 °C 20 10-5 K-1 DIN EN ISO 11359-1;2
Specific heat capacity – J/(g×K) ISO 22007-4:2008
Thermal conductivity – W/(m×K) ISO 22007-4:2008
Electrical properties
  Value Unit Test method
Surface resistivity ≥1013 Ω DIN IEC 60093
Resistivity ≥1015 Ω×cm DIN IEC 60093
Dielectric strength 55 kV/mm DIN EN 60243-1
CTI value – V DIN EN 60112
Optical properties
  Value Unit Test method
Light transmittance –
Refractive index –
Optical errors – DIN 52305/AS
Abrasion-resistance, 100 rotations with 500 g – % haze ANSI Z26.1

Additional downloads

Delivery selection plastic sheets
Specific gravity 0.948 g/cm3
Service temperature -200 … 80 °C
Price category

Special properties

  • better than average wear-resistance
  • better than average sliding characteristics
  • high tensile and impact strength
  • good ability to withstand mechanical loads

Applications

forest industry, mechanical design, transport and conveyor systems

Standard colours

black

Premade pieces

enquire