PA 6 GF30

PA – Polyamide

PA 6 GF30

PA 6 GF30 is an extruded PA 6 with a fibreglass content of 30%. Because of the fibreglass, the material has higher mechanical strength and resistance to heat than would be possible with an unmixed material that is otherwise similar. We deliver PA 6 GF30 as plastic sheets and rods.

Physical properties
  Value Unit Test method
Specific gravity 1.36 g/cm3 DIN EN ISO 1183
Average molecular mass N/A
Water absorption, 24/96 h (23 °C) 0.2/0.3 % DIN EN ISO 62
Weather-resistance poor
Combustibility HB UL 94 DIN EN ISO 527-2
Food safety no
Mechanical properties
  Value Unit Test method
Modulus of elasticity 5700 MPa DIN EN ISO 527-2
Tensile strength 98 MPa DIN EN ISO 527-2
Elongation at break 4 % DIN EN ISO 527-2
Tensile strength at break 5 % DIN EN ISO 527-2
Flexural modulus 5200 MPa DIN EN ISO 178
Flexural strength 140 MPa DIN EN ISO 178
Compressive modulus 4200 MPa EN ISO 604
Compressive strength, 1%/2% 21/42 MPa EN ISO 604
Impact strength (Charpy) 60 kJ/m2 DIN EN ISO 179-1eU
Notch impact strength (Charpy) N/A
Notch impact strength (Izod) kJ/m2 DIN EN ISO 180/2A
Toughness (ball pressure) 232 MPa ISO 2039-1
Toughness (Shore D) N/A
Wear-resistance N/A
Coefficient of friction (against steel) N/A
Thermal properties
  Value Unit Test method
Glass-transition temperature 49 °C DIN 53765
Melting point 218 °C DIN 53765
Operating temperature (instantaneous) +180 °C
Operating temperature (continuous) 100 °C
Operating temperature (minimum) N/A
Thermal expansion coefficient, 23–60 °C 6 10-5 K-1 DIN EN ISO 11359-1;2
Thermal expansion coefficient, 23–100 °C 6 10-5 K-1 DIN EN ISO 11359-1;2
Specific heat capacity 1.3 J/(g×K) ISO 22007-4:2008
Thermal conductivity 0.41 W/(m×K) ISO 22007-4:2008
Electrical properties
  Value Unit Test method
Surface resistivity 1014 DIN IEC 60093
Resistivity 1014 Ω×cm DIN IEC 60093
Dielectric strength 32 kV/mm DIN EN 60243-1
CTI value 550 V DIN EN 60112
Optical properties
  Value Unit Test method
Light transmittance N/A
Refractive index N/A
Optical errors N/A
Abrasion-resistance, 100 rotations with 500 g N/A

Additional downloads

Delivery selection sheets, bars
Specific gravity 1.36 g/cm3
Service temperature N/A … 100 °C
Price category €€ (€8–25/kg)

Special properties

  • excellent mechanical strength
  • resistance to oils, fuels, and solvents
  • good resistance to wear
  • weather-resistance
  • good dimensional accuracy
  • better than average heat-resistance

Applications

gaskets, slide bearings, cogs, chain guides, bushings

Standard colours

black

Premade pieces

enquire

Commonly known brands

CENTROMID® 6 GF, SUSTAMID® 6 GF 30, TECAMID® GF30