PA 6 G SL

PA – Polyamide

PA 6 G SL

PA 6 G SL is a cast polyamide that contains solid lubricants. It features carefully chosen additives that give it unique sliding characteristics and an extremely low coefficient of friction. This material is an ideal choice for applications in which lubricant is required but difficult or impossible to apply. In contrast to PA 6 G + OIL, its lubrication properties are effective immediately. We deliver PA 6 G SL as plastic sheets, rods and hollow rods.

Add to comparison Remove from comparison Compare products
Physical properties
  Value Unit Test method
Specific gravity 1.13 g/cm3 DIN EN ISO 1183
Average molecular mass N/A
Water absorption, 24/96 h (23 °C) 0.2/0.3 % DIN EN ISO 62
Weather-resistance poor
Combustibility HB UL 94 DIN EN ISO 527-2
Food safety no
Mechanical properties
  Value Unit Test method
Modulus of elasticity 3200 MPa DIN EN ISO 527-2
Tensile strength 76 MPa DIN EN ISO 527-2
Elongation at break 14 % DIN EN ISO 527-2
Tensile strength at break 18 % DIN EN ISO 527-2
Flexural modulus 3100 MPa DIN EN ISO 178
Flexural strength 103 MPa DIN EN ISO 178
Compressive modulus 2500 MPa EN ISO 604
Compressive strength, 1%/2% 18/34 MPa EN ISO 604
Impact strength (Charpy) does not break kJ/m2 DIN EN ISO 179-1eU
Notch impact strength (Charpy) 4 kJ/m2 DIN EN ISO 179-1eA
Notch impact strength (Izod) – kJ/m2 DIN EN ISO 180/2A
Toughness (ball pressure) 159 MPa ISO 2039-1
Toughness (Shore D) N/A
Wear-resistance N/A
Coefficient of friction (against steel) N/A
Thermal properties
  Value Unit Test method
Glass-transition temperature 45 °C DIN 53765
Melting point 218 °C DIN 53765
Operating temperature (instantaneous) +130 °C
Operating temperature (continuous) 100 °C
Operating temperature (minimum) N/A
Thermal expansion coefficient, 23–60 °C 11 10-5 K-1 DIN EN ISO 11359-1;2
Thermal expansion coefficient, 23–100 °C 12 10-5 K-1 DIN EN ISO 11359-1;2
Specific heat capacity 1.7 J/(g×K) ISO 22007-4:2008
Thermal conductivity 0.38 W/(m×K) ISO 22007-4:2008
Electrical properties
  Value Unit Test method
Surface resistivity 1014 Ω DIN IEC 60093
Resistivity 1014 Ω×cm DIN IEC 60093
Dielectric strength N/A
CTI value N/A
Optical properties
  Value Unit Test method
Light transmittance N/A
Refractive index N/A
Optical errors N/A
Abrasion-resistance, 100 rotations with 500 g N/A

Additional downloads

Delivery selection plastic sheets, plastic rods, hollow bars
Specific gravity 1.13 g/cm3
Service temperature N/A … 100 °C
Price category €€ (€8–25/kg)

Special properties

  • self-lubrication
  • excellent wear-resistance
  • extremely low coefficient of friction
  • good elongation-related and impact-resistance properties
  • good dimensional accuracy
  • excellent sliding characteristics

Applications

wear plates for the steel industry, slide bearings, slide and chain applications, conveyor tracker rollers, cogs, gears, crane booms

Standard colours

green

Premade pieces

enquire

Commonly known brands

LiNNOTAMGLiDE PRO T, Lubramid 600 T, NYLUBE®, Nylatron® NSM, SUSTAGLIDE, TECAGLIDE®, ZELLAMID® 1100 T