HPMs – High-performance materials
PEEK MDP
PEEK MDP is a polyether ether ketone that can be detected with metal detectors. A metal additive has been added to it to make it easier to detect in pharmaceutical and food production processes. Even the smallest particles of the material can be detected with standard metal detectors. Thanks to its blue colour, it is also visible with optical detectors. All the additives used in the material are of food grade.
- Physical properties
-
Value Unit Test method Specific gravity 1.49 g/cm3 DIN EN ISO 1183 Average molecular mass – 106 g/mol Water absorption, 24/96 h (23 °C) 0.03 % DIN EN ISO 62 Weather-resistance poor Combustibility V0 UL 94 DIN EN ISO 527-2 Food safety yes - Mechanical properties
-
Value Unit Test method Modulus of elasticity 4600 MPa DIN EN ISO 527-2 Tensile strength 111 MPa DIN EN ISO 527-2 Elongation at break 6 % DIN EN ISO 527-2 Tensile strength at break – % DIN EN ISO 527-2 Flexural modulus 3700 MPa DIN EN ISO 178 Flexural strength 166 MPa DIN EN ISO 178 Compressive modulus 4800 MPa EN ISO 604 Compressive strength, 1%/2% 25/46 MPa EN ISO 604 Impact strength (Charpy) 72 kJ/m2 DIN EN ISO 179-1eU Notch impact strength (Charpy) – kJ/m2 DIN EN ISO 179-1eA Notch impact strength (Izod) – kJ/m2 DIN EN ISO 180/2A Toughness (ball pressure) 260 MPa ISO 2039-1 Toughness (Shore D) – Sh D DIN EN ISO 868 Wear-resistance – % Sand-Slurry Coefficient of friction (against steel) – μ - Thermal properties
-
Value Unit Test method Glass-transition temperature 150 °C DIN 53765 Melting point 341 °C DIN 53765 Operating temperature (instantaneous) +300 °C Operating temperature (continuous) +260 °C Operating temperature (minimum) – °C Thermal expansion coefficient, 23–60 °C 5 10-5 K-1 DIN EN ISO 11359-1;2 Thermal expansion coefficient, 23–100 °C 5 10-5 K-1 DIN EN ISO 11359-1;2 Specific heat capacity 1.1 J/(g×K) ISO 22007-4:2008 Thermal conductivity 0.27 W/(m×K) ISO 22007-4:2008 - Electrical properties
-
Value Unit Test method Surface resistivity 1014 Ω DIN IEC 60093 Resistivity 1014 Ω×cm DIN IEC 60093 Dielectric strength – kV/mm DIN EN 60243-1 CTI value – V DIN EN 60112 - Optical properties
-
Value Unit Test method Light transmittance – Refractive index – Optical errors – DIN 52305/AS Abrasion-resistance, 100 rotations with 500 g – % haze ANSI Z26.1
Additional downloads
Delivery selection | plastic sheets, plastic rods, hollow bars |
---|---|
Specific gravity | 1.49 g/cm3 |
Service temperature | … +260 °C |
Price category | €€€+ (>€50/kg) |
Special properties
- detectability with metal detectors
- food-grade product
- blue colour
- high heat-resistance
- excellent mechanical properties
- good impact strength also at low temperatures
- good sliding- and wear-related properties
- electrically insulating nature
- fire rating of UL 94 V-0
- good dimensional accuracy
- low creep
- bulletproof nature
- resistance to hydrolysis and toleration of sterilisation
- inherent flame retardant
- ease of machining
Applications
mechanical engineering, food and drinks industry, pharmaceutical industry
Standard colours
blue-grey