PC GF30

PC (technical quality) – Polycarbonate (technical grade)

PC GF30

PC GF30 is a technical polycarbonate with added glass. The additive gives the material good mechanical tensile strength, wear‑resistance, and dimensional accuracy. The material has extremely low absorption of water.

Physical properties
  Value Unit Test method
Specific gravity 1.42 g/cm3 DIN EN ISO 1183
Average molecular mass N/A
Water absorption, 24/96 h (23 °C) 0.03/0.05 % DIN EN ISO 62
Weather-resistance poor
Combustibility HB UL 94 DIN EN ISO 527-2
Food safety no
Mechanical properties
  Value Unit Test method
Modulus of elasticity 4,400 MPa DIN EN ISO 527-2
Tensile strength 85 MPa DIN EN ISO 527-2
Elongation at break 4 % DIN EN ISO 527-2
Tensile strength at break 6 % DIN EN ISO 527-2
Flexural modulus 4,500 MPa DIN EN ISO 178
Flexural strength 138 MPa DIN EN ISO 178
Compressive modulus 3,300 MPa EN ISO 604
Compressive strength, 1%/2% 21/39 MPa EN ISO 604
Impact strength (Charpy) 71 kJ/m2 DIN EN ISO 179-1eU
Notch impact strength (Charpy) N/A
Notch impact strength (Izod) kJ/m2 DIN EN ISO 180/2A
Toughness (ball pressure) 190 MPa ISO 2039-1
Toughness (Shore D) N/A
Wear-resistance N/A
Coefficient of friction (against steel) N/A
Thermal properties
  Value Unit Test method
Glass-transition temperature 147 °C DIN 53765
Melting point N/A
Operating temperature (instantaneous) +140 °C
Operating temperature (continuous) 120 °C
Operating temperature (minimum) N/A
Thermal expansion coefficient, 23–60 °C 5 10-5 K-1 DIN EN ISO 11359-1;2
Thermal expansion coefficient, 23–100 °C 5 10-5 K-1 DIN EN ISO 11359-1;2
Specific heat capacity 1.1 J/(g×K) ISO 22007-4:2008
Thermal conductivity 0.32 W/(m×K) ISO 22007-4:2008
Electrical properties
  Value Unit Test method
Surface resistivity 1014 DIN IEC 60093
Resistivity 1014 Ω×cm DIN IEC 60093
Dielectric strength N/A
CTI value N/A
Optical properties
  Value Unit Test method
Light transmittance N/A
Refractive index N/A
Optical errors N/A
Abrasion-resistance, 100 rotations with 500 g N/A

Additional downloads

Delivery selection sheets, bars
Specific gravity 1.42 g/cm3
Service temperature N/A … 120 °C
Price category €€ (€8–25/kg)

Special properties

  • extremely high mechanical strength
  • good impact strength
  • resistance to weather (UV radiation and sub-zero temperatures)
  • suitability for high service temperatures
  • good electrical insulation properties

Applications

applications in which standard PC’s dimensional accuracy and mechanical strength do not suffice

Standard colours

translucent

Premade pieces

enquire

Commonly known brands

SUSTANAT® PC GF 20 (20% lasia), TECANAT® GF30