PA 6.6 MoS²

PA – Polyamide

PA 6.6 MoS²

PA 6.6 MoS² is a PA 6.6 that contains molybdenum disulphide. This additive gives material sliding characteristics that are considerably better than those of pure PA 6.6. The additive also improves the material’s resistance to UV radiation. We deliver PA 6.6 MoS² as plastic sheets, rods and as hollow rods.

Physical properties
  Value Unit Test method
Specific gravity 1.15 g/cm3 DIN EN ISO 1183
Average molecular mass N/A
Water absorption, 24/96 h (23 °C) 0.2/04 % DIN EN ISO 62
Weather-resistance good
Combustibility HB UL 94 DIN EN ISO 527-2
Food safety no
Mechanical properties
  Value Unit Test method
Modulus of elasticity 3200 MPa DIN EN ISO 527-2
Tensile strength 84 MPa DIN EN ISO 527-2
Elongation at break 10 % DIN EN ISO 527-2
Tensile strength at break 40 % DIN EN ISO 527-2
Flexural modulus 3100 MPa DIN EN ISO 178
Flexural strength 114 MPa DIN EN ISO 178
Compressive modulus 2700 MPa EN ISO 604
Compressive strength, 1%/2% 20/38 MPa EN ISO 604
Impact strength (Charpy) does not break kJ/m2 DIN EN ISO 179-1eU
Notch impact strength (Charpy) 5 kJ/m2 DIN EN ISO 179-1eA
Notch impact strength (Izod) kJ/m2 DIN EN ISO 180/2A
Toughness (ball pressure) 168 MPa ISO 2039-1
Toughness (Shore D) N/A
Wear-resistance N/A
Coefficient of friction (against steel) N/A
Thermal properties
  Value Unit Test method
Glass-transition temperature 52 °C DIN 53765
Melting point 253 °C DIN 53765
Operating temperature (instantaneous) +170 °C
Operating temperature (continuous) 100 °C
Operating temperature (minimum) N/A
Thermal expansion coefficient, 23–60 °C 10 10-5 K-1 DIN EN ISO 11359-1;2
Thermal expansion coefficient, 23–100 °C 10 10-5 K-1 DIN EN ISO 11359-1;2
Specific heat capacity 1.5 J/(g×K) ISO 22007-4:2008
Thermal conductivity 0.36 W/(m×K) ISO 22007-4:2008
Electrical properties
  Value Unit Test method
Surface resistivity 1014 DIN IEC 60093
Resistivity 1014 Ω×cm DIN IEC 60093
Dielectric strength 35 kV/mm DIN EN 60243-1
CTI value 600 V DIN EN 60112
Optical properties
  Value Unit Test method
Light transmittance N/A
Refractive index N/A
Optical errors N/A
Abrasion-resistance, 100 rotations with 500 g N/A

Additional downloads

Delivery selection hollow bars, plastic sheets, plastic rods
Specific gravity 1.15 g/cm3
Service temperature N/A … 100 °C
Price category €€ (€8–25/kg)

Special properties

  • better than average heat-resistance
  • high tensile strength at break
  • good electrical insulation properties
  • excellent resistance to wear
  • excellent sliding characteristics
  • good UV-resistance
  • good resistance to many oils, greases, and fuels

Applications

bearings, cogs, slide rails, clutches

Standard colours

black

Premade pieces

enquire

Commonly known brands

SUSTAMID® 66 MO, TECAMID® 66 MH, ZELLAMID® 250 MO