PMMA SUPER

Physical properties

	Value	Unit	Test method
Specific gravity	1.16	g/cm3	DIN EN ISO 1183
Average molecular mass	N/A
Water absorption, 24/96 h (23 °C)	0.3	%	DIN EN ISO 62
Weather-resistance	good
Combustibility	HB	UL 94	DIN EN ISO 527-2
Food safety	–

Mechanical properties

	Value	Unit	Test method
Modulus of elasticity	1700	MPa	DIN EN ISO 527-2
Tensile strength	40	MPa	DIN EN ISO 527-2
Elongation at break	N/A
Tensile strength at break	40	%	DIN EN ISO 527-2
Flexural modulus	1800	MPa	DIN EN ISO 178
Flexural strength	62	MPa	DIN EN ISO 178
Compressive modulus	N/A
Compressive strength, 1%/2%	N/A
Impact strength (Charpy)	76	kJ/m2	DIN EN ISO 179-1eU
Notch impact strength (Charpy)	7.6	kJ/m2	DIN EN ISO 179-1eA
Notch impact strength (Izod)	6.3	kJ/m2	DIN EN ISO 180/2A
Toughness (ball pressure)	–	MPa	ISO 2039-1
Toughness (Shore D)	N/A
Wear-resistance	N/A
Coefficient of friction (against steel)	N/A

Thermal properties

	Value	Unit	Test method
Glass-transition temperature	N/A
Melting point	–	°C	DIN 53765
Operating temperature (instantaneous)	+74	°C
Operating temperature (continuous)	+62	°C
Operating temperature (minimum)	N/A
Thermal expansion coefficient, 23–60 °C	–	10-5 K-1	DIN EN ISO 11359-1;2
Thermal expansion coefficient, 23–100 °C	–	10-5 K-1	DIN EN ISO 11359-1;2
Specific heat capacity	–	J/(g×K)	ISO 22007-4:2008
Thermal conductivity	–	W/(m×K)	ISO 22007-4:2008

Electrical properties

	Value	Unit	Test method
Surface resistivity	N/A
Resistivity	N/A
Dielectric strength	–	kV/mm	DIN EN 60243-1
CTI value	N/A

Optical properties

	Value	Unit	Test method
Light transmittance	92
Refractive index	1.49
Optical errors	N/A
Abrasion-resistance, 100 rotations with 500 g	N/A

Additional downloads

• tuote-esite_plazcryl-super.pdf